SEINA-3D
For severe accidents
in nuclear reactors
Three-dimensional Steam Explosion INtegrated Analysis code: premixing and steam explosion.
The animation needs WebGL2, which this browser does not provide.
Abstract
When a hot melt such as molten reactor core material falls into water, the melt jet breaks up, the fragments mix with water and steam, and the mixture may explode. This is a fuel–coolant interaction.
SEINA-3D simulates it in three dimensions, from premixing to the steam explosion.

The phenomenon
Jet breakup
Melt enters the water as a jet. Drops are stripped from its surface until the coherent jet ends.
Premixing
The drops fall through water and steam and break into smaller fragments. Film boiling keeps melt and water apart.
Explosion
A trigger collapses the vapour films. Fine fragmentation feeds a pressure wave that travels through the mixture.
Debris bed
Fragments that have quenched settle on the floor as a porous bed.
A computed case
All resultsFARO L-28: melt jet premixing
A 44 mm jet of UO₂–ZrO₂ melt at 3053 K pours into 1.44 m of saturated water at 0.51 MPa. Between 2.9 s and 8.0 s the jet keeps breaking up, the fragments quench, and a debris bed builds up on the floor.
Contents
- MethodsPhysical models and numerical methods, module by module, with their governing equations.
- ResultsSimulation cases with pre-rendered videos and an interactive 4-D viewer.
- PapersJournal papers on the code and its validation, with their status and DOIs.
- DataSupplementary data packages for the papers, each with SHA-256 checksums.
- AboutWhat this site contains, how its data is kept, and how the homepage animation works.